Service Message 2025–2027 Expedition Concern — 55244

[RecallForum]

Special Service Message · SSM 55244

This is a Special Service Message, not a recall. SSMs are informational notes Ford sends dealers about a known condition or a change in procedure. They are not repair orders, and they don't by themselves change what is covered.

Published: Oct 13, 2026
Applies to: Expedition (2025–2027 model years)

Summary (official text)​

Some 2025-2027 Expedition/Navigator vehicles built without multi-contour second row seats (without minor feature code BYBAL) may exhibit a concern where the instrument panel cluster (IPC) displays "Seat Cannot Lock Do Not Use" for one or both second row seats. This message can appear if the seat control module-J (SCMJ) is offline. If the Ford Diagnostic Repair System (FDRS) shows the SCMJ offline during a network test, determine if a battery disconnect/connect restores SCMJ communication. Refer to Workshop Manual (WSM), Section 414-01. If not, diagnose communication faults referring to WSM, Section 418-00A.<br /><br /> If no communication faults are present but seat cannot lock warnings occur, engineering seeks feedback on latch sensor circuit voltage while the concern is present. Access (but do not disconnect) connectors C3136/C3135 under the affected second row seat(s). Using a multimeter, connect negative lead to body ground. Using a flex probe or similar, back probe terminals 2 and 22 on C3135 and record the voltage. Back probe terminals 8 and 23 on C3136 and record the voltage.

Sources​

• SSM 55244 (PDF, NHTSA document 11038622) — Oct 13, 2026

Details from NHTSA as of Oct 22, 2026. If NHTSA or Ford revises this notice, this post is updated and significant changes are noted in a reply. The linked documents are the authority, and a dealer can confirm whether it applies to your VIN.

Have you experienced this issue with your vehicle? Let us know your model year and engine, plus any diagnosis or repair details.